Valco

Feed Bins & Fill Systems

corner Find a Dealer Near You

 

Feed Storage Bins 6′, 7′, 9′, 12′

VAL-CO bulk storage bins are built with weather-tight die-formed roofing and reinforcing ribs at the seams for added strength and ease of assembly. The bin sheets are made of heavy guage G-90 galvanized steel with 2-2/3-inch wide by 1/2-inch deep corrugation. Legs are die formed with a sturdy bracing system for structural support. The 22-inch warp-resistant top lid closes tight to keep out moisture. Bin bolts have a built-in weather seal and a drip edge keeps water away from the taper hopper and unloading boot.

More Information

bin-boot

Bin Accessories Boots

Choose from single 30°, single straight, or double straight poly upper boot transition. Lower boots are available for single, double, or twin directional installations. All boots have a handy clean-out door.

Poly Drop Outlets

Three sizes are available with shutoffs and a variety of options to meet most any requirement.

Controls

Mechanical and electronic switched offer reliable system control and the maximum run timers helps protect against feed wastage.

Discharge Heads

Option of pre-wired or water resistant. They are available in single- or double-line and are a strong platform for gear or belt drive.

auger

Flexible Augers Low, Standard, and High Volume

The VAL-CO Flexible Augers are used to convey dry ground feed and crumble type mash with variable moisture content and particle size. With a variety of models to choose from, there is one to fit every need.

Flexible Auger Feed Delivery Systems

Model 720 2.25″ (55mm)

Large Pellets or Shelled Corn: No
Max Moisture Content: 18%
Max Particle Size: 1/8″ diameter X 1/2″ long
Auger Diameter: 1.52″
Feed Delivery Rate: 15 lbs./minute

Model 725 “Pellet” 3″ (75mm)

Large Pellets or Shelled Corn: Yes
Max Moisture Content: 18%
Max Particle Size: 1/8″ diameter X 1/2″ long
Auger Diameter: 2.25″
Feed Delivery Rate: 35 lbs./minute

Model 730 3″ (75mm)

Large Pellets or Shelled Corn: No
Max Moisture Content: 18%
Max Particle Size: 1/8″ diameter X 1/2″ long
Auger Diameter: 2.38″
Feed Delivery Rate: 50 lbs./minute

Model 735 HV 3.5″ (90mm)

Large Pellets or Shelled Corn: No
Max Moisture Content: 18%
Max Particle Size: 3/16″ diameter X 1/2″ long
Auger Diameter: 2.71″
Feed Delivery Rate: 100 lbs./minute

Model 735 HM 3.5″ (90mm)

Large Pellets or Shelled Corn: No
Max Moisture Content: 27%
Max Particle Size: 3/8″ diameter X 3/4″ long
Auger Diameter: 2.38″
Feed Delivery Rate: 50 lbs./minute

bintrac

BinTrac® Inventory Monitoring

The BinTrac inventory monitoring system tracks the real-time inventory of your feed by the weight of the bin. The bin-side display shows the current weight of individual bins in up to a 4-bin cluster. The bin weighing system can be easily installed on existing and loaded bins, no jack required. The system provides 24-hour feed use for the last four days and saves the last four fill amounts to confirm or check deliveries. The hanging load cell is protected against ice and moisture and proprietary isolation protects the loadcells from electrical surges and lightning. Comes with a 1-year warranty.

More Information